Write a Review

Perform at your highest potential with GU Energy Gel. The 3:1 ratio of maltodextrin and fructose spares your limited glycogen stores with a combination of slow and fast-absorbing carbohydrates. The electrolytes sodium and potassium are just what your legs crave to stay firing properly. Branched-chain amino acids speed recovery and reduce muscle damage, and of course the delicious flavors go down easy.

Angled Presta valve adapter - Designed for disc wheel use

- Sliding closure helps keep sweat and precipitation away from valuables - Large, clear, center window allows easy operation of touch screen - Compatible with most smartphones - 7.5"" (19cm) x 4.5"" (11cm) wide

- Made from waterproof tarpaulin & polyester - Water protective folding closure - Universal Bridge System compatible - Reflection on all sides - Dimensions: 41cm x 18cm x 36cm - Volume: 48L

- Good protection at low theft risk - Recommended for securing entry level and children bicycles - 12mm strong, high quality and very flexible coil cable - Synthetic coating to prevent damage of the bicycle's paintwork - ABUS automatic cylinder with user-friendly reversible key - Two keys are supplied with the lock - Snap Cage bracket (SCMU) for universal mounting

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle

The new Strip Drive Rear Pro has been optimized with our new Wide Angle Optics lens (270° of visibility) and received a massive 32.5-hour increase in maximum runtime for up to 53 hours. It still features a class-leading 300-lumen Daytime Flash mode, in addition to 10 other output options thanks to its five LEDs. Its co-molded construction is now more compact, and can be mounted to aero or round posts. Equipped with a micro-USB port, charging is simple and efficient. Specs - Max Lumens: 300 - Weight: 53g - Max Runtime: 53 hours - Recharge Time: 2 hours

Swank is retro-value for modern times, carrying the freedom of youth into the excitement and unpredictability of tomorrow. Swank’s light frame is designed for a no-slip fit and is equipped with shatterproof, scratch-resistant lenses covering a spectrum of popular colors.

- Extra-large hook - Vinyl coated to protect your bike - 2-pc set

- Proofide is the only substance that should be used to care for all Brooks Leather Saddles - A new saddle should be treated with Brooks Proofide leather dressing to help assist the breaking-in process - Proofide keeps the leather supple as it is specially formulated from natural ingredients to condition, preserve and shower proof the saddle

Lezyne's Gauge Drive HP is a compact hand pump made of custom CNC machined aluminum for precise, lightweight construction. This high-pressure pump design easily inflates road tires to riding pressure with fewer strokes. The overlapping handle and barrel are integrated into a compact design. It comes equipped with Lezyne's ABS Pen Gauge, a compact in-line pressure gauge compatible with Presta and Schrader valves.

Real endurance fuel - Rock-solid sustained energy - No sugar crash - Easy to digest, no GI distress BENEFITS: Unlike other similar-looking products on the market, Hammer Gel’s complex carbohydrates, all-natural ingredients, and pH-balancing formula are easily digestible, and provide quick-acting yet long-lasting energy in a convenient, tasty, concentrated form. The addition of branched-chain amino acids helps to prevent muscle tissue breakdown while reducing fatigue. - Hammer Flask holds 5-6 servings. FREE flask with purchase of Hammer Gel jug! - Only Espresso and Tropical flavors contain caffeine, 50 mg for Espresso and 25 mg for Tropical per serving. - All Hammer Gel flavors are vegan except Nocciola. - Kosher Certification

Planet Bike's PB Cage holds your bottle securely with sturdy 6.2mm-diameter 6061-aluminum tubing and comes in a variety of colors so you can coordinate your bike down to the last detail.

Park Tool's Utility Pick Set is a set of three unique, multi-purpose picks ideal for a wide variety of detail work. Features: • Aluminum handle with magnet • Picks are replaceable, cold formed, heat treated and polished high carbon steel • Set includes 1-straight, 1-hook and 1-90 degree pick

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Turn your bike into an errand-running, cargo-hauling machine with Sunlite's Lift-Off Basket. This sturdy basket attaches to your bike in a snap via handlebar mounts. It carries all your day's booty and the rubber-coated carry handle lets you bring your basket along when you're off the bike!

Developed with feedback from New York City bike messengers, the Messenger Mini+ helps you lock more and carry less. Its 7/10 security rating makes it a perfect lock for quick stops in metropolitan areas and college campuses and longer stops in rural and suburban areas. The wheel extender can secure either the front or back wheel while the Mini captures your frame and the immovable object you lock it to. It comes with two stainless steel keys with convenient coiled wrist key chains. Specifications & Features: - 11mm hardened MAX-PERFORMANCE STEEL SHACKLE provides lighter weight lock while maintaining the security level of Messenger Minis - WHEEL EXTENDER can secure either the front or back wheel while the Mini captures your frame and the immovable object - INCREASED SHACKLE DIMENSIONS allows for a wider range of lock up scenarios - NEW patent pending BENTFOOT DOUBLE DEADBOLT DESIGN - REINFORCED CUFF over crossbar and cylinder for additional security - HIGHER SECURITY DISC-STYLE CYLINDER is pick and drill resistant - NEW ROTATING DUST COVER with stopper plug - 2 STAINLESS STEEL KEYS with coiled wrist key chains - Key Safe Program - Product dimensions: 3.75” x 6.5” (9.5cm x 16.5cm) - Wheel extender: 3.25" x 3.75" (8.3cm x 9.5cm) - Product weight: 2.60 lbs (1.18 kgs)

Banjo Brothers' Medium Seat Bag is perfect for carrying gear on any length ride. And if you're going big, it expands to haul even more gear. It's made from heavy-duty 840-denier nylon with a wide-mouth opening for easy access. And you've got 360 degrees of visibility with reflective accents and a rear tab for a light. - Weight: 5 oz. - Dimensions: 6.75" L x 4" W x 3" H unexpanded - Capcity: 65-81 cubic inches - Heavy duty 840 denier nylon construction - Wide-opening design for easier access - Flap hinges up from bottom to keep contents in place - 360 degree reflective accents - Web loop for light

Convert your Burley into a jogging stroller. It's the perfect way to expand the capabilities converting the trailer to a jogger. Tracking adjustment fine tunes the orientation of the front wheel. It's the perfect accessory for any family on the run.

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Made from tough steel and reinforced with extra material at the highly stressed wrench openings, Park’s shop-quality Pedal Wrench is built to easily install and remove pedals, and to last and last. It has 15mm and 9/16-inch precision openings to fit all pedals. And it boasts a long, round, vinyl-coated handle that won’t dig into your hand and provides optimum leverage. There's even a hole in the end of the wrench for hanging it on your toolboard.

Made of durable polycarbonate and featuring the highest quality hardware of any fenders in their class, Portland Design Works' Poncho Fenders keep you safe from spray from head to toe. They use thick 6mm stays for extra rigidity, sturdy rubber mudflaps for extra coverage, and front safety release tabs to ensure your wheels keep turning even if debris gets lodged between the fender and tire. The Road size Poncho Fenders will fit close clearance road bikes with 700x23 tires maximum or road bikes designed to take fenders with up to 700x25 tires. They are designed to fit under caliper brakes and forks, and include add-on mounts for bikes that lack eyelets. - 30 mm wide to fit 700x23 tires maximum - Pre-installed stays and brackets for faster mounting - Weight: 454 g (16 oz) - Lifetime PDWarranty The City size Poncho Fenders are designed for touring and CX bikes with 700x35 tires maximum. They come with all necessary hardware to mount to bikes with brazed on eyelets. - 45 mm wide to fit 700x35 tires maximum - Pre-installed stays and brackets for faster mounting - Weight: 567 g (20 oz) - City size installation manual (PDF) - Lifetime PDWarranty

Bikepacking is also about embracing minimalism. You head off on your bike into the great outdoors, away from it all for an extended period. The amount of gear you can take is limited! The ORTLIEB Frame-Pack allows you to exploit your bike frame to create valuable stowage. Thanks to its lower center of gravity below your top tube, the Frame-Pack makes for an ideal stowage location for heavy gear such as tools, camping stoves, and food supplies. The proven, waterproof nylon fabric and the waterproof zipper ensure that your things remain absolutely dry even in the most inclement weather. Mounting the Frame-Pack with the ultra-strong Velcro straps to the top tube, seat tube, and down tube is a snap. The Frame-Pack is available in a 4-liter size and a 6-liter size – depending on the size of your bike frame.

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

The Vero takes all the style and performance of the best-selling Veloce and packs it into a smaller frame. Perfect for those with smaller faces, the Vero is great for taking on your run, cycling through town, and chasing personal records. - All Tifosi lenses provide 100% protection from harmful UVA and UVB rays and are constructed from scratch-resistant, shatterproof polycarbonate - Grilamid TR-90 frame is made of an incredibly light and durable nylon material that resists chemical and UV damage - Adjustable, hydrophilic rubber nose and ear pieces allow for a custom fit, limiting slippage and increasing comfort - Optically decentered lenses eliminate distortion and prevent unwanted magnification - Vented lenses increase airflow to prevent fogging and help keep you cool - Tifosi's proprietary glare guard lens coating reduces eye strain - Case included

Add sparkling personality to your ride with these bling drink holders! - Give your ride your own personal flair while having a great drink holder - Can hold wallet, phone, keys, sunglasses as well as your favorite beverage - Easy to install on your handlebars with one screw - Many varieties available

The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike

Your daily hydration habit with a sustainable twist. The lightweight and durable Chute Mag water bottle is now made with Tritan Renew, a highly durable and lightweight plastic made with 50% recycled material. Besides the do-good construction, you'll love the high-flow universal magnetic cap. It's leak-proof when closed, stows securely out of the way when drinking, and is compatible with Eddy+ and Carry Cap vessels. The comfortable carry handle makes for grab-and-go convenience and when the day is over, just toss in the dishwasher and prepare for your next adventure. Tritan Renew is made using Polyester Renewal Technology, a recycling process that's more efficient than standard mechanical recycling, producing new material with less demand on finite resources. Odor- and stain-resistant, and free of BPA, BPS, and BPF. - Magnetic Cap: Stows out of the way when drinking - Color Match Tether - Easy to Carry: Comfortable carry handle - Leak-Proof: Leak-proof when closed - Lightweight and Durable - Odor- and Stain-Resistant - Easy to Clean: Cap and vessel dishwasher-safe - Drink Clean: BPA-, BPS- & BPF-free - Universal Cap: Compatible with Eddy + and Carry Cap vessels - Tritan Renew Copolyester: Made with 50% recyclable material

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)